Rusting is a very serious problem if you are working with metal objects. Not only does it damage the metal you are working on, but it also reduces the usefulness of your tools by reducing their durability. So you must get rid of the rust by any means necessary. The most common methods of removing rust are grinding, sanding, using a wire brush and wire wheel.
從金屬中取出鏽蝕時，電線輪非常有用。因為它是一個靜止工具，你可以把它放在桌子上，然後用手扭曲並轉動金屬物體來清理它。
So, without any further delay, let ustake a look at how to remove rust with wire wheels它的利弊是什麼。
How to Remove Rust with Wire Wheels – Follow Easy Steps
If youknow how to use a wire wheel to remove rust, your life will be much easier, especially if you are dealing with smaller pieces of metal or small metal equipment. You just have to follow the following steps to use awire wheel to remove rust.
1. Placing the Wire Wheel
在使用鋼絲輪之前，您必須將其放在正確的位置。將線輪放在桌子上或堅固的表麵上。因為在使用時，電線輪造成了很多振動。所以任何不穩定的表麵都會隨著時間的推移而受到損壞。此外，將線輪靠近電源插座。由於這些是電子設備，您需要將它們連接到您的電源插座以供其工作。
2. Wearing Protective Gear
Always wear proper protective gear such as protective goggles while using wire wheels. Because the wheels have bristles made of metal which can fly into your eyes while working. You don’t want to damage your eyes over a small piece of metal, or anything for that matter. Also, using gloves is recommended as your hands will be in pretty proximity to the fast-moving bristles. Your bare skin coming in contact with them can result in some pretty painful injuries.
3. Lubing Up the Metal
Wire wheels work best when the metal being cleaned is lubed up nicely. You can use oil or primers to lube up the metal. Lubing the metal up will also make sure that the metal will be better polished after the rust removal.
4. Using the Wheel
Now we come to the business end of the procedure. First, start your wire wheel. Then take your rusty piece of metal or equipment and press it gently against the bristles of the wheel and slowly move them in a backward and forward motion. Although the wire wheel will not get rid of 100% of the rust, it will get rid of most of it. Twist and turn the metal around the rotating wheel so that it can gain access to every single nook and cranny of the equipment or the metal piece. After a few minutes, you will find the metal to be almost completely free of any rust.
5. Polishing the Metal
完成後，在您的金屬中擺脫鏽，您需要拋光它以消除絲輪留下的旋轉標記。將無鏽金屬帶到拋光輪上並拋光它幾分鍾才能獲得良好的，閃亮的外觀。
Does A Wire Wheel Damage Metal?
Yes, a wire wheel can damage the metal. If you press down on the wheel firmly with your piece of metal, it will take chunks of metal off. Also, don’t use the wheel on an edge in such a manner that the wheel turns into it. Failure to do so will damage the metal.
Pros of Using A Wire Wheel
The wire wheels have a lot of advantages. They are:
- 它是完美的消除生鏽了smaller objects.
- You can use both your hands, which gives you more maneuverability.
- 在金屬上比其他方法更粗糙，例如使用awire brush for rust removal.
- It offers more stability than handheld machines such as drills and grinders.
Cons of Using A Wire Wheel
Along with its advantages, using a wire wheel has its fair share of disadvantages as well. They are :
- 它非常沉重，所以它不便攜。
- You need a stable and sturdy base for it near a power outlet, which is not always available.
- 機器本身根本無法操縱。
- 你不能用這個較大的金屬工作。
- The wire wheel most likely will not get rid of all the rust in the metal.
Precautions You Need to Take While Using A Wire Wheel
As with any other power tool, you need to follow a few precautionary steps to make sure the work is done safely and perfectly. These are:
- 永遠記得戴防護護目鏡和手套。
- If you are not wearing gloves, make sure that you are keeping your hands and fingers at a safe distance from the bristles.
- Always make sure to use a stable surface to place your wire wheel.
- Do not press the metal too firmly onto the wire wheel.
- Use the wheel on an edge in such a manner that the wheel rotates away from it.
- 切勿超過導絲手冊中提到的車輪的RPM水平。否則，你會燒掉車輪。
Final Words
The last thing you want while working with metal objects is them being useless due to rust. But knowing how to remove rust with wire wheels will help you to no end in this regard. Just follow the proper instructions and precautions, and you will be able to work with equipment and other metal objects that are almost entirely free of rust.
You May Also Like:
How to Remove Rust with A Wire Brush – The Easy Way.
Table of Contents
