So, adding some coating might do the trick for your table surface. But the market offers many choices for waxing. It literally takes a lot of time to decide which one to use. Some of them are pricey, others might not offer good quality.
考慮到所有這些因素,我們哈ve done the research to help you in handpicking the best one for you. This article will not only save your time, but it will also provide enough information to decide which one matches your budget.
In a hurry? Here’s Our Top Selection
5 Best Wax for Table Saw in 2022
1. Minwax 785004444 Paste Finishing Wax, 1 lb, Natural
When it comes to table saw, everyone’s concern lies with the table. Without a smooth tabletop, even an experienced woodworker fails to deliver a smooth cut and it always gets messy.
If your works are getting messy, then it might not be your skill or the saw causing the problems. The problem lies with your tabletop. You just need a better coating over your table surface.
The other perks of the product are using it takes no extra measurement or precaution. It only takes a cloth to use on any surface. It is advisable to use the wax on the raw surface with previously finished wood. We recommend you to give two coats 10-15 minutes prior to the first one with a bare surface.
2. Glidecote V207501 Woodworking Aerosol Lubricant
Glidecote Woodworking Aerosol Lubricant doesn’t contain silicone or petroleum oil, so you don’t have to worry about your tabletop getting any stains.
The unique fast-drying technology will give your table a glossy furnished look three times faster than other traditional. If you’re having problems with “hang-ups”, then this could be your solution on sliding surfaces.
It is a multipurpose lubricant that you can use on multiple surfaces other than a table surface. It works on drill presses, lathes, band saws, and miters.
When we say it’s environmentally friendly, don’t take our words for granted. The CARB compliant plays the role behind making the wax safe for the air.
There’s no extra work to do while using it. You won’t need to wear any gloves or any other protective gear. Just spraying over the table surface is enough to make it work.
3. SC Johnson Paste Wax- Best for Money
Moving on, let us introduce you to the most popular and also the cheapest one on our list. Some users use it for daily use to clean the wooden floor surfaces. It has excellent capabilities in terms of renovating wooden antiques.
So, how good does it work on a table saw bed? If you want a smooth and long-lasting wax at a lower price, then SC Johnson Paste might be the just product to purchase. While keeping your table surface smooth, it can also serve your furniture polish.
It takes a little more than the other premium product in this list in terms of drying time. This paste Wax takes half an hour to dry, and there’s no extra task before using it.
談論蠟，大多數人都傾向於相信會有一個奇怪的氣味。好吧，讓我們向您保證，SC Johnson Paste Wax完全無味。
So, the bottom line for the SC Johnson Paste Wax is if you’re looking for quality and under the budget, this one is the way out to your budget.
4. Bostik 10220 Aerosol Top-Cote
The table bed’s surface is always essential while you’re cutting some wood pieces with a saw. Bostik 10220 Aerosol Top-cote is something dedicated to the cause. It will give you a durable coating that is also anti-corrosive and ensures low friction on the table surface.
It dramatically lowers the friction of any surface, which can make your wood sliding easier. It’s also resistant to dirt, dust, and moistness. So, whether it’s an iron surface or wood table, it will resist rusting and corrosion of iron as well as oxidation of wood.
You can use this top-cote not only on your tabletop but also on the jointer bed, hand tools, or any other metal in your workshop. Remember to use it only in the surface coating as it has low-temperature ratings and not designed for internal use.
It’s not rocket science using Bostik Top-Cote. It only takes regular spraying over the surface and lets it dry. There’s no extra buffing or polishing needed. The coat will keep your surface good as new for a long, long time.
The final one on our list comes from an elite manufacturer. They started manufacturing around 1933 and are still ruling the industry. Trewax is a natural paste wax that contains Carnauba, which is known as the world’s hardest wax.
Carnauba, which is also known as a Brazilian wax, comes directly from the Carnauba palm tree. The wax is fully nature-friendly.
People often complain about the frequent use of coating as most of the coats wear off fast in heavy use. If you do have the same problem, then we recommend you to use Trewax Paste Wax.
If you’re confused about what to do with the rest of the paste wax, let us tell you how multipurpose it is. When you’re done with the table saw, you can use it in hardwood floors to make your wood panel glossy.
Even if you own something like a marbled floor or bronze tools, it will do a great job. The smallest pack is only 12.35-ounce, but it covers approximately 800 square feet. It is not slippery and takes a little time to dry off.
No matter how good your product is, if you don’t have the basics of applying wax, it could get messy. Here’s the stepwise guideline for using paste wax.
First, wipe clean the whole surface and make sure the surface doesn’t have any dirt. After that use a light coat over the entire area of the table body. Remember to apply uniformly with a cloth. Then let it dry. Every wax paste has its own drying time. It’s mostly around 10 to 15 minutes.
After the drying of the first light coat, buff the whole surface with another clean cloth. Remember to apply a circular motion while grinding or polishing the area. By the end of the buffing, you’ll have a brand new, glossy, and low friction surface that you’re expecting.
If you’re using natural waxes, you might not need any extra precautions. But if you’re confused and don’t know the specification well, use a pair of gloves for safety.
Paste Wax vs. Top-cote
The more relevant question is if you’re looking for something durable or aesthetic is your goal? Paste wax and top-cote serve different purposes. Though people always get mixed up with the concept.
A top-cote will ensure the durability of your wood surface with a long-lasting coat. It isolates the surface from the air, which decreases the chance of oxidation in wood. In terms of iron or steel, it works as an anti-rust element.
Wax is relatively less durable than top-cote. It might wear off sooner than you think. But when it comes to glossy finishing and sound reflection, it sure does leave an aesthetic view.
In terms of applying them on the surface, wax takes a little more work than top-cote. Top-cotes are typically sprayed system cans. On the other hand, wax needs some force with hands to apply and buff in the end.
What does paste wax do to wood?
Ans.Paste wax seals off the surface of the wood. It puts a thin coat over the surface to resist air from getting in contact. Areas with more humid air can cause the wood to fatigue. On the other note, if you’re looking for a smoother table surface, then coat does that too. It minimizes the friction on the table surface.
Ans.Yes, but with precautions. As for car waxes, most of them contain silicone oil as an ingredient to make your car shiny and water resilient, it could damage your wood panel. Silicone oil is not eco-friendly. So, we recommend using paste wax to use for wood, floor, and furniture.
Should I apply wax on a table saw?
Ans.Well, apart from other usefulness of wax, it’s incredible how fast you can clean your table after waxing! As it makes the surface smooth and decreases the friction, the cleaning gets a whole lot easier. It stops oxidation. Oxidation is actually when the surface gets contact with the Oxygen in the air, wood might lose its texture and the saw can get rust.
How do you make a table saw sled slide better?
Ans.The trick is to apply a light coat of any paste wax from the above list to the sled bottom and let it dry. After the light coat dries, then start polishing, this will make the sled lose friction and give you a smooth table saw sled. The low friction surface will offer better sliding.
To recapitulate, I would say it is your preference whether you want something premium or something under the budget. Remember to pick something durable and long-lasting like our winner of this listMinwax Paste Finishing Waxfor a better service and experience with your table saw.
You May Also Like: